High metal sensitivity
Sensing width 200 - 2000 mm ( 4 in - 6, 6 ft) .

Conveyor installation
Dividable sensor head
Product effect compensation

Applications:
Plastic recycling
Rubber production
Wood and paper processing
Food related industries

Type: METAL SHARK® TU
Installation: Conveyor, typical horizontal, but each angle is applicable. Sensor head able to divide: No belt cut required.
Metal free zone Before/ after detector: Fix and solid metal = 100 mm Moving / vibrating metal = 1, 5x aperture height
Power supply: 85-264 V / 50-60 Hz
Power input: 100 Watts
Ambient temperature: -10...+ 50 C / 15...120 F
Product ( food) temperature: -20...+ 80 C / 0...180 F
Degree of protection: Control unit IP65 ( Nema 4x, 12) Sensor IP67 ( Nema 6P, 12)
Sensor head: Stainless steel housing
Control unit:

* Stainless housing, attached to the side of sensor head ( Option: prepared for wall mounting, with link cable)
* Digital noise filters eliminate undesired signals.
* Product effect library – the characteristics of 50 different products can be stored and recalled here.
* Automatic learning provides simple and quick learning of product characteristics for product effect compensation.

Link cable 2, 5 m ( 8, 2 feet) , with cable protection tube, applies only with wall mounting option for the control unit
Timer yes, for reject device control Delay and duration adjustable from 0-9990 ms
Conveyor speed 25 - 2000 mm/ sec. ( 1� - 6, 6 feet/ sec.)
Out signals

* Metal relay changeover contact ( max 250V/ 1A)
* Metal alarm signal for PLC ( out 24V/ 20mA)
* Fault relay changeover contact ( max 250 V/ 1 A)
* Reject device drive, e.g. solenoid valve ( 24V DC/ 30mA)

In Signals

* Reject trigger, e.g. optical sensor ( 24V DC)
* Control air pressure of reject device ( 24V DC)
* Control reject success ( 24V DC)
* Remote metal reset push button ( 24V DC)
* Remote lock keyboard against unauthorized access ( 24V DC)

Logging interface Rs232, e.g. printer to log process data according HACCP Network interface RS 485 ( Option)

Options

* Remote product selector switch
* Customized conveyor design
* Various belt types ( Chain link, Polyurethan etc.)
* Belt control unit Start/ Stop/ Reset with frequency inverter
* Alarm flash light
* Alarm horn

Untuk informasi dan pemesanan hubungi :

Distributor, Agent, Penjualan, Pemasangan dan Training.
Jakarta - Indonesia

Alamat: Jl. Pahlawan Revolusi No. 22B
Jakarta Timur

Telp. + 62-21-8611 131, 8611 259, 8611 444, 8611449

Fax : + 62-21-8611 207

EMAIL : sales@ metal-detektor.com

Website : www.metal-detektor.com

Kunjungi Website kami untuk kebutuhan tool-tools dan Hardware perusahaan anda.
Atau silakan hubungi sales consultant, Hotline kami di ( 021) 8611444
kami akan berusaha membantu Anda memberikan informasi dalam membuat keputusan pembelian kebutuhan Anda/ perusahaan Anda.