KYORITSU 8127, Load current clamp sensor[21 Nov. 2010, 19:24:29]
Keterangan
Applicable model 5010/ 5020 ( * ) ,
6300, 6310
* When you use the sensors with KEW5010/ 5020, please check the " Applicable model list" to check if your KEW5010/ 5020 can be used with the sensors.
Conductor size : ¦ 24
Rated current : AC 100A
Output voltage : AC 500mV/ 100A ( AC 5mV/ A)
Accuracy : ± 0.5% rdg± 0.1mV ( 50/ 60Hz)
± 1.0% rdg± 0.2mV ( 40Hz~ 1kHz)
Phase Shift : within ± 2.0º ( 45~ 65Hz)
Withstand voltage : AC 3540V for 5 seconds
Cable length : Approx. 3m
Output connector : MINI DIN 6pin
Operating temperature ranges : 0~ 50º C, less than 85% RH ( without condensation)
Output impedance : Approx. 10©
Applicable standards : IEC 61010-1: 2001,
IEC 61010-2-032: 2002,
CAT.III 300V pollution degree 2
Dimensions : 100( L) x 60( W) x 26( D) mm
Weight : Approx.160g
Accessories : 9095 ( Portable case) , Instruction manual, Cable marker
Option : 7146 ( Banana ¦ 4 adjuster plug)
7185 ( Extension Cable)
