Keterangan :

100% Polypropylene Construction: high purity for demanding Dialysis applications. No lubricants or antistatic agents: high purity, low rinse up time. Integral Lengths: no stacking required and reduced chance of bypass. Graded density: traps large particles on the outside, small in the body of the filter. Continuous Manufacturing Process: Assures consistency from one box to the next. Disposability: as there are no cores in Hytrex filters, filters are incenerateable with less then 1% residual ash, ( excluding material filtered out in the body of the filter) . Low media migration: minimizes cross contamination frequently seen in other types of filters. To order quantities above 3 cases, please contact us Many additional lengths are available upon request. Most common endcaps, closures, and " O" ring types available upon request. ® - Hytrex is a registered Trade Mark of GE Water

Description and Use
The purity and reliability of Hytrex cartridge filters ( Figure 1) ensure consistent results, time after time. Thermally bonded micro fibers create a strong secure cartridge that traps particles throughout its depth. Hytrex combines efficiency, long life and purity to create a high performance depth filter.

* Pure polypropylene construction
* Fast rinse-up in high purity applications
* Meets the requirement of the FDA Title 21 of the Code of Federal Regulations 174.5 and relevan subparts of 177
* Wide chemical compatibility
* Automated packaging for a clean finished product
* NSF Standard 42 certified

Typical Applications

* High Purity Chemicals
* Bottled Water
* Pre-treatment for Reverse Osmosis
* Oil& Gas
* Electronics

High Dirt Holding Capacity

* True-graded density captures particles throughout entire filter depth
* High dirt-holding capacity means longer life and fewer changeouts which translates to money saved
* Lower density at the surface of the filter with progressively higher density toward the center
* No surface blinding, which reduces flow and increases filter hangeouts

Wide Range of Lengths & Adapters

* Standard lengths fit most housings— custom lengths can also be provided
* Wide range of polypropylene end-adapters including gaskets, extended cores and
* GE Water & Process Technologies patented self-seal polypropylene springs
* If required, specify FDA-compliant sealing materials and end adapter

Size

* 1 Micron 40" PN : GX01-40
* 3 Micron 30" PN : GX03-30
* 5 Micron 40" PN : GX05-40
* 5 Micron 30" PN : GX05-30

For more information, visit : http: / / www.watermart.co.id